Cabled conductor at New England Wire Technologies. Photo: NEWT View full media

US-produced waveguide in a test stand at The National Institutes for Quantum and Radiological Science and Technology in Japan. Photo: US ITER View full media

A blower component for the high-powered resonant test line at ORNL. Photo: US ITER/ORNL View full media

US drain tanks in storage. Photo: US ITER View full media

Vacuum flange fabrication at Nor-Cal. Photo: US ITER View full media

A high frequency radiometer prototype. Photo: US ITER. View full media

Ion cyclotron transmission line prototype in a test stand for seismic analysis. Photo: US ITER View full media

Inner conductor support prototype with quartz rods. Photo: US ITER/ORNL View full media

Pellet injector prototype. Photo: US ITER/ORNL View full media

The US-procured 400 kV high voltage transformers were installed at the ITER site. Photo: ITER Organization View full media

Prototype residual gas analyzer testing at ORNL validated quadrupole mass spectrometer performance; further testing will occur at the JET tokamak. Photo: US ITER View full media

Toroidal field coil magnet. Photo: ITER Organization View full media